Aluminum Alloy AA7075-T6,T651
| Grade | : | อลูมิเนียมอัลลอย7075,Aluminium 7075-T6; Aluminium 7075-T651, UNS A97075; ISO AlZn6MgCu; Aluminium 7075-T6; Aluminium 7075-T651; AA7075-T6 |
|---|---|---|
| AA | : | Aluminum Alloy AA7075 |
| ISO | : | AlZn6MgCu |
| DIN | : | AlZn6MgCu |
| Temper | : | T6,T651 |
| Description | : | A Zr + Ti limit of 0.25 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so agreed. Agreement may be indicated, for example, by reference to a standard, by letter, by order note, or other means which allow the Zr + Ti limit. |
Mechanical Properties
| Yield Strength 0.2% | : | 503 Mpa |
|---|---|---|
| Tensile Strength | : | 572 Mpa |
| Elongation at Break | : | 11% ( for 1.6mm Thickness ) |
| Hardness Brinell | : | 150 HB ( 500 kg load with 10 mm ball. Calculated value. ) |
Chemical Composition (%)
| Aluminuim (AL) | : | Remainder |
|---|---|---|
| Copper (Cu) | : | 1.2 – 2 |
| Cromuim (Cr) | : | 0.18 – 0.28 |
| Silicon (Si) | : | 0.4 Max |
| Magnesium (Mg) | : | 2.1 – 2.9 |
| Manganese (Mn) | : | 0.3 Max |
| Iron (Fe) | : | 0.5 Max |
| Titanuim (Ti) | : | 0.2 Max |
| Zinc (Zn) | : | 5.1 – 6.1 |
| Other each | : | 0.05 Max |
| Other Total | : | 0.15 Max |
